NodJobsNodJobs

Staff Electrical Engineer

Red Cell Partners · Remote; Southern California preferred

🇺🇸 Remote (US)Principal$150,000 – $175,000/yr9d ago

At a glance

Where
Remote — limited by the employer to: California
Pay
$150,000 – $175,000/yr — as listed by Red Cell Partners
Level
Principal
Experience
6+ years
Posted
November 9, 2026
Last confirmed open
57m ago
At Red Cell Partners
21 open remote roles — mostly Software Development (7), DevOps & Sysadmin (3), Finance & Legal (3). Pay is listed on 15 of them ($135,000 – $440,000/yr).
How to apply
Directly on Red Cell Partners's own site — no NodJobs account needed.

About the role

Leads mixed-signal electrical design for the electronics of D2's plasma-enhanced antenna and communications systems, covering schematic capture, PCB layout, bring-up, and integration and test with the RF lead. Suits a senior electrical engineer with 6-10+ years of cross-disciplinary mixed-signal and PCB experience who will also mentor engineers and lead design reviews.

What you'll do

  • Define the mixed-signal backbone (digital control, embedded interfaces, sensing, data conversion, power) for a plasma-enabled aperture communications system.
  • Lead design reviews, mentor engineers, and partner with the RF subject matter expert to set clean digital/RF boundaries across bands, modes, and variants.
  • Design microcontroller- and FPGA-based control, data converters, precision sensing, and drive and bias circuitry for plasma elements.
  • Own boards end to end from schematic capture through PCB layout, addressing signal and power integrity, thermal margin, testability, noise, EMI, arcing, and transient stress.
  • Bring up and debug prototypes using oscilloscopes, logic analyzers, and automated data capture, finding root causes across electrical, plasma, and electromechanical behavior.
  • Plan and execute integration and test campaigns that retire technical risk and correlate circuit models and bench data with plasma, thermal, and RF performance.
  • Help define fabrication and assembly approach, build sequencing, design verification, and configuration control as hardware moves toward qualification.
  • Work with mechanical, software, systems, PCB, component, and test partners, designing for EMC (e.g., MIL-STD-461) and defense qualification toward production.
  • Architect a new kind of radio front end that turns a plasma-enabled aperture into a controllable, field-ready communications system.
  • Design the drive and bias circuitry that ignites, sustains, and modulates the plasma elements.

What you'll need

  • Degree in Electrical Engineering or closely related field, or equivalent combination of education, training, and directly relevant experience.
  • Typically 6-10+ years of relevant engineering work showing technical ownership of complex cross-disciplinary mixed-signal systems, from architecture through verification.
  • Demonstrated expertise designing, laying out, building, and debugging printed circuit boards.
  • Proficiency in a professional schematic and PCB environment such as Altium Designer, KiCad, or OrCAD.
  • Strong fundamentals in mixed-signal and digital design: microcontroller or FPGA interfaces, data converters, serial buses, power electronics, controls, instrumentation, signal integrity, and power integrity.
  • Hands-on proficiency with oscilloscopes, logic analyzers, signal generators, power supplies, electronic loads, probes, and safe laboratory practices.
  • Demonstrated ability to lead design reviews, mentor engineers, communicate technical risk, and make sound decisions with incomplete information.
  • Ability to meet requirements associated with work on U.S. government and national-security programs.

Nice to have

  • Familiarity with RF power amplifiers, impedance matching, high-voltage supplies, pulsed-power circuits, plasma systems, or electrically small antennas.
  • Experience with FPGA or embedded firmware development, or close collaboration with firmware engineers on hardware/software bring-up.
  • Familiarity with electromagnetic compatibility practices and standards such as MIL-STD-461.
  • Experience with embedded control, data acquisition, automation scripts, or software-defined radio interfaces.
  • Experience supporting design verification, environmental qualification, SBIR/STTR programs, or defense product development.
  • Active U.S. security clearance or eligibility to obtain one.

Benefits listed by Red Cell Partners

  • 100% employer-paid comprehensive health care including medical, dental, and vision for employee and family
  • Paid maternity and paternity leave for 14 weeks at normal pay
  • Unlimited PTO with management approval
  • Professional development and continued learning opportunities
  • Optional 401(k), FSA, and equity incentives
  • Mental health benefits through Tara Mind
  • Cost-effective GLP-1 solutions through Crux
  • Career track opportunity with potential for rapid advancement

Tools & skills mentioned

Altium DesignerKiCadOrCADMIL-STD-461FPGAmicrocontrollerdata convertersserial busesoscilloscopeslogic analyzers

Summarized by NodJobs from Red Cell Partners's posting.

Full posting from Red Cell Partners

About Dash 2 Dynamics (D2) D2 is building a new class of advanced communications systems powered by the integration of plasma physics, radio-frequency engineering, and novel antenna architectures. Our work is aimed at overcoming fundamental limits in conventional antennas and enabling communications capabilities that are smaller, more wideband, and more resilient in demanding environments. We are taking breakthrough technology from the laboratory through rapid prototyping, rigorous modeling and test, product qualification, and operational deployment. This is an opportunity to join a hands-on, multidisciplinary team working at the edge of electromagnetics, materials, electronics, plasma science, and mission-focused product development. The systems we are developing will reshape how defense, aerospace, and commercial users communicate across contested and congested RF environments. About the Role Dash 2 Dynamics (D2) is seeking a Staff Electrical Engineer to lead mixed-signal electrical design for the electronics that enable our plasma-enhanced antenna and communications systems. You will own designs from schematic capture through PCB layout, with an emphasis on the digital, control, sensing, and power circuitry that surrounds the RF chain, and help shape the build strategy that takes hardware from benchtop prototypes to qualification-ready units. Working hand-in-hand with our RF subject matter expert, you will also run integration and test: bringing up boards, verifying performance, and closing the loop between design intent and measured system behavior. What You Will Do Electrical Architecture & Technical Leadership • Architect a new kind of radio front end. Define the mixed-signal backbone (digital control, embedded interfaces, sensing, data conversion, and power) that turns a plasma-enabled aperture into a controllable, field-ready communications system. • Set the technical bar. As the senior electrical voice on a small, fast-moving team, lead design reviews, mentor engineers, and partner with our RF subject matter expert to draw clean digital/RF boundaries that scale across bands, operating modes, and product variants. Circuit & Hardware Development • Design the electronics that put plasma under command. Build microcontroller- and FPGA-based control, data converters, precision sensing, and the drive and bias circuitry that ignites, sustains, and modulates the plasma elements at the heart of our antennas. • Own your boards end to end. Take designs from schematic capture through PCB layout, designing in signal and power integrity, thermal margin, and testability while engineering out noise coupling, EMI, arcing, parasitics, and transient stress. Prototype, Test & Troubleshooting • Be first to see new hardware come alive. Bring up and debug first-of-their-kind prototypes with oscilloscopes, logic analyzers, and automated data capture, chasing root cause across electrical, plasma, and electromechanical behavior. • Run the integration and test campaigns that prove it works. Plan and execute tests that retire the biggest technical risks, correlating circuit models and bench data with plasma, thermal, and RF performance alongside our RF lead. Integration, Qualification & Transition • Shape how D2 builds hardware. Help define fabrication and assembly approach, prototype build sequencing, design verification, and configuration control as breakthrough technology moves from the lab bench toward qualification. • Carry it across the finish line. Work with mechanical, software, and systems engineers and with PCB, component, and test partners, designing for EMC (e.g., MIL-STD-461) and defense qualification on the path to repeatable production. Qualifications Required • Degree in Electrical Engineering or a closely related field, or an equivalent combination of education, training, and directly relevant experience, with typically 6–10+ years of relevant engineering work that demonstrates technical ownership of complex, cross-disciplinary mixed-signal systems, from architecture and interface trade-offs through schematic capture, layout, bring-up, integration, and verification. • Demonstrated expertise designing, laying out, building, and debugging printed circuit boards, with proficiency in a professional schematic and PCB environment such as Altium Designer, KiCad, or OrCAD. • Strong fundamentals in mixed-signal and digital design, including microcontroller or FPGA interfaces, data converters, serial buses, power electronics, controls, instrumentation, signal integrity, and power integrity. • Hands-on proficiency with oscilloscopes, logic analyzers, signal generators, power supplies, electronic loads, probes, and safe laboratory practices. • Demonstrated ability to lead design reviews, mentor engineers, communicate technical risk, and make sound decisions with incomplete information. • Ability to meet requirements associated with work on U.S. government and national-security programs. Nice to Have • Familiarity with RF power amplifiers, impedance matching, high-voltage supplies, pulsed-power circuits, plasma systems, or electrically small antennas, sufficient to work effectively with RF specialists. • Experience with FPGA or embedded firmware development, or close collaboration with firmware engineers on hardware/software bring-up. • Familiarity with electromagnetic compatibility practices and standards such as MIL-STD-461. • Experience with embedded control, data acquisition, automation scripts, or software-defined radio interfaces. • Experience supporting design verification, environmental qualification, SBIR/STTR programs, or defense product development. • Active U.S. security clearance or eligibility to obtain one. Salary Range: $150,000-$175,000. This represents the typical salary range for this position based on experience, skills, and other factors. Our Red Cell Partners Benefits (may differ for each incubation): For full-time roles • Career track opportunity with potential for rapid advancement with strong performance as the firm grows • 100% employer paid, comprehensive health care including medical, dental, and vision for you and your family. • Paid maternity and paternity for 14 weeks at employees' normal pay. • Unlimited PTO, with management approval. • Opportunities for professional development and continued learning. • Optional 401K, FSA, and equity incentives available. • Mental health benefits are available through Tara Mind. • Cost effective GLP-1 solutions available through Crux. We’re an Equal Opportunity Employer: You’ll receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, protected veteran status, or on the basis of disability. Applicant Data Disclosure By submitting an application, you acknowledge that Red Cell Partners, LLC ("Red Cell") uses third-party service providers to facilitate its recruitment and hiring processes. These providers include applicant tracking systems, candidate verification platforms, and fraud detection tools (collectively, "Hiring Platforms"). Your application materials, including your résumé, cover letter, work samples, responses to application questions, and any other information you submit, may be transmitted to and processed by these Hiring Platforms for the following purposes: • Managing and administering your application throughout the hiring process; • Verifying the accuracy and authenticity of application materials, including by cross-referencing information you provide against publicly available sources and proprietary databases; • Identifying indicators of potentially fraudulent, fabricated, or materially misleading application content, including but not limited to discrepancies between submitted materials and publicly available professional profiles, geographic anomalies, and fabricated work histories. Applications that are flagged through this process as containing indicators of fraud or material misrepresentation may be declined from further consideration. If you have questions about the status of your application or the evaluation process, please contact talent @redcellpartners.com. Red Cell requires its Hiring Platform providers to process your information solely for the purposes described above and in accordance with applicable law. Your information will be retained only for as long as necessary to fulfill these purposes and any applicable legal obligations, after which it will be deleted in accordance with Red Cell's data retention policies. For more information about how your data is used, please refer to our Privacy Policy and Applicant Privacy Notice.

NodJobs is free for job seekers — we never charge to apply, and this role takes you straight to the company's own application.

Similar live jobs